110V Percussion Drill Hire London | 13mm 1/2 inch Hammer Drill (Site Safe)

Yes — 110V Percussion Drill Hire London is available across all boroughs by booking. Collect from Greenford UB6 by appointment or book kerbside delivery to your site. If you searched for drill hire near me from a London postcode, the same service applies. Call 020 3375 4048 or email info@hireload.co.uk with your postcode, material and hole size.

A percussion drill (hammer drill) is designed to drill into masonry, brick and block using a combined rotation + hammering action, and into timber and metal using rotation only. It’s an everyday tool for fixings, wall plugs, anchors, pilot holes and installation work.

Yes. Specification may vary by unit supplied. Confirm your material, hole size and power setup before booking, especially if your job needs a particular feature. Drill bits and accessories are not included unless specifically confirmed in writing before booking.

Yes — in hammer mode, this drill is suitable for brick, block and soft masonry, where the drill setup is appropriate. For repeat deep holes in harder material such as reinforced concrete, an SDS drill is usually more efficient. Use the correct drill bit for the material.

Light concrete drilling is possible in hammer mode for occasional holes, where the drill setup is suitable. For sustained drilling into dense or reinforced concrete, consider an SDS drill instead — ask us about availability. Use the correct drill bit for the material.

No — this is a standard percussion drill (also called a hammer drill). An SDS drill uses a different bit shank and delivers higher-impact hammer drilling for heavier masonry/concrete work. They are different tool classes.

Yes — wall plugs, masonry anchors and standard screw fixings are typical jobs. Use the correct drill bit for the material, switch hammer mode on for brick/block, and check for hidden cables/pipes before drilling.

Yes — use rotation-only mode (no hammer) for clean holes in timber. Pilot holes, joinery work, batten fixings and general timber drilling are typical jobs. Use the correct drill bit for the material.

Yes — use rotation-only mode for light metal drilling, where the drill setup is suitable. Keep the speed controlled and clear swarf regularly; very thick or hardened steel may need specialist tooling. Use the correct drill bit for the material.

Do not assume drill bits are included. Drill bits and accessories are not included unless specifically confirmed in writing before booking. Please confirm your material and hole size before booking.

Use the correct drill bit for the material you’re working on. Drill bits and accessories are not included unless specifically confirmed in writing before booking. Confirm your material, hole size and power setup before booking and we’ll let you know what’s appropriate.

Yes if you don’t already have a 110V site supply — you’ll need a suitable step-down transformer from 240V mains. We hire 110V site transformers; see the 3kVA site transformer.

Yes — this is a 110V site-use drill designed for UK construction site use. A 110V supply is used on many UK construction sites.

You’ll need a 110V supply on site or a step-down transformer to use a 110V drill at home. If you only have standard 240V mains, a 240V or cordless drill may be simpler. Ask us about availability of alternatives.

Outdoor drilling is possible if the supply, plug, socket and cable are kept dry and protected from rain or pooling water. Do not use in wet conditions. Stop work and protect the supply if weather deteriorates.

No — corded electrical drills must not be used in wet conditions. Keep plugs, sockets and the drill dry; protect the supply from rain and standing water at all times.

At minimum: eye protection (impact-rated safety glasses or goggles), dust mask, hearing protection for prolonged use or hammer mode, sturdy boots and suitable workwear. Use gloves if appropriate — but avoid loose gloves near rotating bits.

Use a cable / pipe detector before drilling any wall. Avoid drilling directly above or below sockets, switches and bathroom/kitchen fittings. If unsure, find another fixing position and stop if you hit an obstruction.

No — this is a drill, not a breaker. Heavy chiselling and demolition work needs a dedicated breaker, not a percussion drill.

For repeat deep holes in masonry or concrete, larger diameter anchor sets, or sustained heavy masonry work, an SDS drill is usually more efficient and easier on the operator. For general fixings and mixed materials, this percussion drill is the right pick. Email us if you’d like to discuss an SDS option.

Yes — London delivery is available by booking across all boroughs. Pricing depends on your zone and time slot. Send your postcode and hire dates when you enquire.

Yes — Greenford UB6 collection is available by appointment. The drill is portable and easily collected; bring proof of ID and your booking reference.

Standard delivery is kerbside — we deliver to the nearest safe point for the vehicle. The drill itself is compact and easy to move, but please ensure someone is available to receive the delivery.

Call 020 3375 4048 or email info@hireload.co.uk with your postcode, hire dates, the material you’re drilling, the hole size and your power supply (110V site or 240V + transformer). We’ll confirm availability and the best slot for delivery or Greenford UB6 collection.

The live price displays at the top of this page and varies by hire length. Daily, weekend and weekly rates differ. For multi-item or multi-day jobs, call us and we’ll suggest a sensible package.

Common pairings: a 3kVA site transformer if you don’t have a 110V supply, a 110V tripod site light for low-light drilling, and a wet/dry vacuum for clearing masonry dust afterwards.

Tell us about the job — material, hole size, number of holes and your power supply. We’ll confirm whether the 110V percussion drill is the right fit or suggest a different drill class (SDS, cordless or 240V). Call 020 3375 4048 or email info@hireload.co.uk.

Yes — if you searched for drill hire near me from a London postcode, Hireload offers percussion drill rental London, hammer drill hire London and other tool hire London options with Greenford UB6 collection and London delivery by booking. Send your postcode and hire dates and we’ll confirm the best option.