💧 Leak / water damage
Typical setup: air movers + dehumidifier; heater where suitable.
Confirm the water source is fixed and electrics are safe before booking.
Skip to content
Drying and heating equipment for damp rooms, leaks, building drying, plastering and temporary site warmth. Greenford UB6 collection or London delivery by booking.
Use dehumidifiers to remove moisture from the air, air movers or carpet dryers to move air across wet surfaces, and heaters to raise temperature where suitable. Many drying jobs need more than one type of equipment, depending on room size, airflow, ventilation, moisture level and power supply. If you're unsure, call us with the issue and the room — we'll help match the right setup.
Match the issue to the right starting equipment, then refine inside that sub-category.
| Problem / Job | Start here | Best for | Check before booking |
|---|---|---|---|
| 💧 Damp room or condensation | Dehumidifier | Reducing moisture in enclosed rooms | Room size, ventilation, temperature, power |
| 🧽 Wet carpet or after a leak | Air mover + dehumidifier | Drying wet floors and circulating air | Water source fixed, floor type, airflow path, safety |
| 🧱 Fresh plaster or building work | Dehumidifier + airflow | Controlled building drying where suitable | Plaster stage, ventilation, manufacturer guidance, heat sensitivity |
| 🌡️ Cold room or temporary heating | Heater | Temporary warmth, work comfort, drying support | Indoor/outdoor use, power, ventilation, heater type |
| 🏗️ Construction site drying | Drying setup | Renovation, plastering, decorating, damp control | Room size, number of rooms, power supply, moisture level |
| 🏭 Commercial unit or warehouse | Heater · dehumidifier · airflow | Large spaces, maintenance, temporary comfort | Area size, airflow, power, access, operating hours |
| 🚿 Flood or water damage | Call before booking | Leaks, flood cleanup support, wet floors | Safety, water source, electrics, professional restoration need |
| 🧹 End-of-job drying | Air movers + dehumidifiers | Speeding up drying after cleaning or decorating | Surface type, ventilation, timing, temperature |
Jump straight into a sub-category and pick the right equipment for your project.
Compact home units through to higher-output dehumidifiers for damp, leaks and building drying where suitable.
View DehumidifiersAir movers and carpet dryers for wet surfaces, post-leak drying and end-of-job airflow.
View Air MoversElectric fan heaters and oil-filled radiators for temporary site, workshop and indoor warmth.
View HeatersCombined dehumidifier + air mover packages for renovation, plaster and refurb drying where suitable.
Call to plan setupTemporary heating options for warehouses, large units and commercial sites, depending on product availability and power supply.
View Temporary HeatingDehumidifiers for flood-drying support, building drying and refurbishment moisture control where suitable.
View Building DryingPick the closest match — each card sends you to the right Hireload category.
Common situations and the equipment customers usually combine.
Typical setup: air movers + dehumidifier; heater where suitable.
Confirm the water source is fixed and electrics are safe before booking.
Typical setup: dehumidifier sized to the room.
Ventilation and consistent room temperature usually help dehumidifier output.
Typical setup: dehumidifier + air mover for refurb drying where suitable.
Drying time depends on materials, moisture level and ventilation — no fixed timeline.
Typical setup: dehumidifier with airflow support.
Avoid forcing high heat on fresh plaster — follow product guidance.
Typical setup: air mover or carpet dryer; dehumidifier where moisture is high.
Air movers can help improve airflow in tight spaces and corridors, depending on the product and setup.
Typical setup: electric fan heater for active site warmth, depending on product and power supply.
Confirm available power supply (single-phase or 3-phase where applicable) and operator safety on cold sites.
Typical setup: larger fan heater where available; dehumidifier where damp is the issue.
Match heater output to ceiling height and floor area, subject to power supply and availability.
Typical setup: any single category, by availability.
Call ahead — short-notice availability is confirmed at the time of booking.
Quick comparison so you can choose the right primary equipment, or combine them.
| Equipment | Main job | Best for | Watch out for |
|---|---|---|---|
| 💧 Dehumidifier | Removes moisture from the air | Damp rooms, building drying, leaks, plaster drying | Room size, temperature, ventilation, drainage if needed |
| 💨 Air mover / carpet dryer | Pushes airflow across wet surfaces | Wet floors, carpets, post-leak drying, end-of-job airflow | Doesn't remove moisture from air on its own — usually paired with a dehumidifier |
| 🌡️ Heater | Raises ambient temperature | Cold rooms, site warmth, supporting drying where suitable | Heaters alone don't remove moisture; ventilation or dehumidification still needed |
| 🏗️ Combined drying setup | Air movement + moisture removal (and heat where suitable) | Renovation drying, refurb, post-flood drying, multi-room jobs | Power supply, equipment count, drying timeline depends on conditions |
Live prices live on each product page. Use this to plan your enquiry.
Choose a category above, or call 020 3375 4048 with the room size, issue, power supply, access and hire dates.
Have these answers ready and we'll help match you to the right setup faster.
From Hireload you can hire dehumidifiers, air movers and carpet dryers, and electric fan heaters and oil-filled radiators — covering damp rooms, wet floors, building drying, plaster drying and temporary site warmth.
A dehumidifier removes moisture from the air. An air mover pushes airflow across wet surfaces. For most water-damage jobs you usually want both — the air mover speeds evaporation, and the dehumidifier captures the moisture released into the air.
A heater raises temperature, which can support drying where suitable, but heaters on their own don't remove moisture from the air. Pair with a dehumidifier and ventilation for proper drying.
Use an air mover or carpet dryer for high airflow at floor level. Where the room is enclosed or carpet is heavily saturated, add a dehumidifier to capture the moisture.
Yes — air movers, dehumidifiers and heaters where suitable. For active leaks or major flooding, please call 020 3375 4048 first so we can advise on the right combination and confirm safety considerations before booking.
Yes — delivery is available across London by booking, with scheduled slots. Order ahead where possible; short-notice availability can be checked by phone.
Yes. Greenford UB6 collection is available by appointment and is usually the simplest low-cost option for short hires where available.
Drying time varies by material, room size, moisture level, ventilation, temperature and equipment combination. We don't promise fixed timelines — we help you choose equipment likely to suit the job, and you reassess as the room dries.
Hire cost depends on the equipment type, hire length, delivery distance and how many machines you need. Live prices are shown on each product page. For multi-machine setups, call us and we'll suggest a sensible package.
Confirm the power supply on site (240V single-phase or 3-phase), indoor vs outdoor use, ventilation, the area size, and whether you need a fan heater or a quieter oil-filled radiator. Then pick from our heater range or call us with the details.
Often yes — moisture has to go somewhere. Even with a dehumidifier, controlled ventilation can help, especially in larger jobs. For sealed plaster drying, follow the plaster manufacturer's guidance on temperature and airflow.
Hire usually makes sense for short-term jobs, occasional water-damage events, and project-based work where storage and maintenance aren't worth the hassle. Buy makes sense for regular weekly use. Most landlords, FM teams and contractors hire drying and heating equipment job by job.
Tell us what you're drying or heating, the room size, moisture level, power supply, access and hire dates. We'll help you choose the most suitable Hireload category or setup.