15kW Industrial Electric Fan Heater Hire (3-Phase) – Medium Site & Warehouse Heater

Yes. Collection is from Greenford UB6 and London delivery is available by booking. Call 020 3375 4048 or email info@hireload.co.uk to confirm.

Yes. The unit is designed for site use and can be repositioned around the work area. It can be repositioned where safe, practical and compatible with the 3-phase power setup.

Temporary heating support in workshops, warehouses, site rooms, offices, refurbishment spaces and commercial areas — anywhere clean electric heat is preferred over gas or diesel and where 3-phase power is available.

Yes. It’s a strong fit for cold workshops and garages with a suitable 3-phase supply. Confirm the site socket and load before hire.

Yes, where a 3-phase 400/415V supply is available and the space is appropriate for an industrial fan heater. Many small offices use single-phase 13A sockets, so confirm the power setup first.

Yes, where 3-phase is on site and the use is suitable. Many construction sites already have 3-phase distribution; share your socket details when booking.

3-phase 400/415V. This is an industrial-grade connection — not a standard 13A or 110V site plug. Send us a photo of your site socket and we’ll confirm compatibility before delivery.

No — but you do need a suitable 3-phase 400/415V supply with the correct connector. We’ll advise the safest setup once we see your power arrangement.

Different jobs suit different fuels. Electric heating produces no combustion fumes and no fuel odour and is well-suited to enclosed work areas where combustion heaters aren’t appropriate. Gas and diesel can suit larger ventilated outdoor or industrial setups; we can advise.

No. Clean electric heat means no combustion fumes and no fuel odour — useful for indoor and enclosed work areas.

It supports drying conditions by warming the air, but it does not remove moisture. For damp areas, pair it with a dehumidifier and air movers for best results.

No. Heaters warm the air; they do not extract moisture. Use a dehumidifier for moisture removal.

Often yes — particularly for damp rooms, post-leak drying or plaster and screed support. Heaters and dehumidifiers work well together when the workflow is right.

Only once standing water has been removed with a wet & dry vacuum. Then a heater plus dehumidifier and air movers can support drying. Larger water damage usually needs a specialist plan.

It can help speed drying when paired with a dehumidifier and good airflow, but drying times are never guaranteed. They depend on the material, humidity, ventilation and area.

No. Keep the heater clear of standing water, splash zones and wet floors. Remove water first with a wet & dry vacuum.

This is an indoor-style industrial heater. Outdoor or exposed use is not the intended setup; if your situation is borderline, call us and we’ll advise.

No. Supervise the unit during operation and switch off when the area is unattended or when the work is complete.

No. Keep clear of fabrics, dust sheets, paper, paint tins and combustible materials. Do not use in flammable vapours or hazardous atmospheres.

It depends on area, ceiling height and heat loss. Tell us the floor area, ceiling height and how cold the space gets, and we’ll recommend a setup.

Yes. Self-collection from Greenford UB6 is available — the lowest-cost option when you have a suitable vehicle.

Yes. London delivery is available by booking; call 020 3375 4048 to confirm your postcode and timing.

Check the booking calendar at the top of this page for live daily and longer-term pricing, or call 020 3375 4048 for a quote.

Hireload offers a full range: Dri-Eaz Vortex Axial Fan 110V, Vacmaster Air Mover 240V, High Airflow Carpet Dryer, Air Mover Floor Dryer, and Wet & Dry Vacuum.

Heat warms the space, a dehumidifier removes airborne moisture, and an air mover moves air across surfaces. For drying jobs, all three often work together. Call us if you’d like a recommendation for your specific situation.