Electric Heater Hire London | 3kW Oil Filled Radiator (Silent Indoor Heating)

Yes. Collection is from Greenford UB6 and London delivery is available by booking. Call 020 3375 4048 or email info@hireload.co.uk to confirm.

Temporary heating support in enclosed indoor work and living areas — bedrooms, offices, site cabins, workshops, garages, commercial rooms and refurbishment spaces. It plugs into a standard UK mains socket; normally no 110V site transformer is required for this general mains-powered heater, but confirm the power setup before hire.

Yes. The unit is a 3kW oil filled radiator with castor wheels and a carry handle for easy repositioning between rooms.

No. This is an oil filled radiator — silent operation, no fan, no blown dust. If you need fast forced-air heat for a workshop or trade environment, see the Broughton 3kW Fan Heater 240V instead.

Yes — 240V single-phase mains via a standard UK wall socket. Plug in and switch on, no 110V transformer or 32A commando outlet required. For 110V site supplies, use the 110V Fan Heater 3kW 32A instead.

No. A standard 240V mains socket is enough. A site transformer is only needed if you are using 110V site equipment instead.

Yes, where a standard mains supply is available and the space is appropriate for a 3kW heater. For faster forced-air heat in trade environments, the Broughton 3kW Fan Heater 240V is a stronger fit.

Yes. Most commercial spaces use standard 13A outlets, so this silent oil filled radiator is a natural fit for temporary office or commercial heating where fan noise would be disruptive.

Only where 240V mains is available. Many construction sites require 110V site equipment — in that case use the 110V Fan Heater 3kW 32A.

The Broughton 3kW Fan Heater 240V is a forced-fan industrial heater that heats the air quickly — ideal for workshops and garages. This 3kW Electric Heater is a silent oil filled radiator — ideal for offices, bedrooms and occupied rooms where fan noise matters.

The 110V Fan Heater 3kW 32A is a reduced-voltage site heater that uses a 32A commando plug and a 110V site transformer. This Electric Heater plugs into a standard UK mains socket — no site transformer required.

The 15kW Industrial Electric Heater is a 3-phase 400/415V unit for medium-to-large warehouses, workshops and site zones. This 3kW Electric Heater is a smaller single-phase plug-in unit for offices, bedrooms and small enclosed indoor rooms.

Different jobs suit different fuels. Electric heating produces no combustion fumes and no fuel odour and is well-suited to enclosed indoor rooms where combustion heaters aren’t appropriate. Gas and diesel can suit larger ventilated outdoor or industrial setups; we can advise.

No fumes — clean electric heat with no combustion fumes and no fuel odour, useful for indoor and occupied rooms. It supports drying conditions by warming the air but it does not remove moisture; for damp areas, pair it with a dehumidifier and air movers for best results.

No. Heaters warm the air; they do not extract moisture. Use a dehumidifier for moisture removal.

Often yes — particularly for damp rooms, post-leak drying or plaster and screed support. Heaters and dehumidifiers work well together when the workflow is right.

Only once standing water has been removed with a wet & dry vacuum. Then a heater plus dehumidifier and air movers can support drying. Larger water damage usually needs a specialist plan.

It can help speed drying when paired with a dehumidifier and good airflow, but drying times are never guaranteed. They depend on the material, humidity, ventilation and area.

No. Keep the heater clear of standing water, splash zones and wet floors. Remove water first with a wet & dry vacuum.

No. This is an indoor-only heater. Outdoor or exposed use is not the intended setup; if your situation is borderline, call us and we’ll advise.

No. Supervise the unit during operation and switch off when the area is unattended or the work is complete.

No. Keep clear of fabrics, dust sheets, paper, paint tins and combustible materials. Do not use in flammable vapours or hazardous atmospheres.

It depends on area, ceiling height and heat loss. Tell us the floor area, ceiling height and how cold the space gets, and we’ll recommend a setup.

Yes — self-collection from Greenford UB6 is the lowest-cost option when you have a suitable vehicle. London delivery is available by booking; call 020 3375 4048 to confirm your postcode and timing.

Check the booking calendar at the top of this page for live daily and longer-term pricing, or call 020 3375 4048 for a quote.

Heaters warm the air. Dehumidifiers remove airborne moisture. Air movers push airflow across surfaces. For drying setups, all three often work together — call us and we’ll recommend the right combination for your job.