3kW 110v Fan Heater Hire London | 110V 32A Industrial Site Heater

Yes. Collection is from Greenford UB6 and London delivery is available by booking. Call 020 3375 4048 or email info@hireload.co.uk to confirm.

Temporary site heating in enclosed work areas where 110V reduced-voltage supply is the standard — site cabins, workshops, garages, refurbishment and fit-out spaces. It requires a suitable 110V transformer and 32A distribution setup, which should be confirmed before hire.

Yes. The unit is a 3kW forced-fan electric heater with an adjustable thermostat and over-temperature cut-off.

Yes. It uses a 32A commando plug to connect directly to a site distribution board.

110V single phase via a 32A commando outlet, fed from a suitable 110V site transformer and 32A distribution setup. It does not use a standard 13A plug or a 240V mains socket.

Yes — a suitable 110V transformer and 32A distribution setup are required if you don’t already have them on site. Confirm the transformer rating with us before hire.

Yes. It’s purpose-built for 110V site environments where reduced-voltage supply is required for portable equipment.

Yes. A 3kW unit can suit many standard site cabins or welfare units fed from 110V distribution, depending on insulation, door openings and heat loss.

Yes, where 110V supply is available and the space is appropriate for a 3kW fan heater. For 240V workshops, use the 240V plug-in version of this product if available.

Only where 110V site power and a 32A commando outlet are available. Most offices use standard 13A mains sockets and aren’t 110V-compatible — confirm power before hire.

The 15kW Industrial Electric Heater is a 3-phase 400/415V unit for medium-to-large warehouses, workshops and site zones. This 110V fan heater is a smaller 3kW single-phase unit for site cabins and small enclosed work areas, depending on heat loss and site conditions.

Different jobs suit different fuels. Electric heating produces no combustion fumes and no fuel odour and is well-suited to enclosed work areas where combustion heaters aren’t appropriate. Gas and diesel can suit larger ventilated outdoor or industrial setups; we can advise.

No. Clean electric heat means no combustion fumes and no fuel odour — useful for indoor and enclosed work areas.

It supports drying conditions by warming the air, but it does not remove moisture. For damp areas, pair it with a dehumidifier and air movers for best results.

No. Heaters warm the air; they do not extract moisture. Use a dehumidifier for moisture removal.

Often yes — particularly for damp rooms, post-leak drying or plaster and screed support. Heaters and dehumidifiers work well together when the workflow is right.

Only once standing water has been removed with a wet & dry vacuum. Then a heater plus dehumidifier and air movers can support drying. Larger water damage usually needs a specialist plan.

It can help speed drying when paired with a dehumidifier and good airflow, but drying times are never guaranteed. They depend on the material, humidity, ventilation and area.

No. Keep the heater clear of standing water, splash zones and wet floors. Remove water first with a wet & dry vacuum.

This is an indoor-style site heater. Outdoor or exposed use is not the intended setup; if your situation is borderline, call us and we’ll advise.

No. Supervise the unit during operation and switch off when the area is unattended or when the work is complete.

No. Keep clear of fabrics, dust sheets, paper, paint tins and combustible materials. Do not use in flammable vapours or hazardous atmospheres.

It depends on area, ceiling height and heat loss. Tell us the floor area, ceiling height and how cold the space gets, and we’ll recommend a setup.

Yes. Self-collection from Greenford UB6 is available — the lowest-cost option when you have a suitable vehicle.

Yes. London delivery is available by booking; call 020 3375 4048 to confirm your postcode and timing.

Check the booking calendar at the top of this page for live daily and longer-term pricing, or call 020 3375 4048 for a quote.